本机是用来清除残损，龟裂，变色等旧线热熔标线的**设备。使用发动机带动打
磨头高速旋转，打磨头在旋转离心力的作用下与路面凸起部分磨合，将旧线清除干净，该机选用进口原装汽油发动机，超耐用
硬质合金打磨头，保证了设备的质量，可根据路面与标线的情况调整，具有打磨性能好，速度快，操作保养简单等特点。
Fusion marking removal machine is used to eliminate
damaged,crazing and discolored special hardware of marking heating
index line.Engine drives the burnishing head revolve at top
speed,burnishing head grinds in with the jut of road under the
function of revolving centrifugal force,and thus marking is cleaned
clear.The machine choose petrol engine of imported original
binding,and adopts super-durable hard alloy burnishing head which
ensures the quality of the equipment,and can be adjusted according
to the condition of road surface and index line.It is characterized
for good burnishing performance,fast speed and easy operation and
maintenance.
技术参数 <Technical parameter>
1.引擎<Engine>:10.5—12.5HP进口原装四冲程风冷汽油发动机<10.5—12.2HP imported fourstroke cooling petrol
engine>
2.操作方法<Operating
method>:车把上设有油门控制开关，车架上设有打磨头起落控制杆，打磨力调节器<the handle bar is equipped with petcock control Switch,and
the frame is equipped with burnishing head landing control bar
and burnishing force adjuster>
3.打磨力调节范围<Adjusting range of
burnishing force>:强、中、弱无极调节<active trimming knife
strong,moderate,and weak stepless control>
4.胶轮<Rubber
tire>:铸铁轮股，耐磨胶特制，后轮设双轮单立轴加强轮<cast iron
wheel nave, made of antifriction gelatin,and the rear whell is
equipped with dual gun single—stack axis stren-thening
wheel
5.打磨头<Burnishing
head>:三个独立旋转的磨头组成，磨头上镶嵌进口超耐磨硬质合金，宽度180mm<made of three independently revolving burnishing
head,and the head is inlaid with import
-ed super-antifriction hard alloy,and width
is 180mm>
6.磨头寿命<Serving life of burnishing
head>:20000-30000m
7.尺寸与重量<Dimension and
weight>:1150*720*890mm
8.净重<Net
weight>:162kg
联系人：姜静静 15837141487
