NY311-11 Hydrostatic epoxy
industrial floor space paints
适 用 范 围 Application Scope
对施工环境有洁净、防爆要求或是不能有溶剂挥发的重载混凝土地面的耐磨及高装饰的涂装。可在严重磨损环境下，作为严重磨损环境下，作为环氧漆系列的修补涂地、中涂或面涂。
For construction environment has
reqirements on cleanness and anti-explosion, or heavy load concrete
floor which no solvent volatile,and high-decoration painting. Under
the condition of severe abrasion, can be the repair bottom
paint.
性 能 特 点 Product features
水性环氧地坪是一种双组份常温固化的水性高自流平性的环氧厚浆型地坪。交联成膜后，可形成高丰满度、强耐磨性的装饰层，并具有优良的耐化学性。在施工过程中不会产生有害的有机溶剂挥发及气味。在气温低至5℃时也同样可以形成坚硬、耐磨的表面层。
Hydrostatic epoxy floor space is
one epoxy heavy-slurry floor space which is double ingredient,
harden on ambient temperature and self flow-flat. After forming the
membrance, can form the decoration layer in high fullness and
strong wear resistance, and excellent in anti-chemicals.During
construction there will be no harmful organic solvent or gas
volatile. When the air temperature is below 5℃,also can form the
hard and wear-proof surface paints layer.
施 工 工 艺Construction
process
1、基层表面必须清洁、平整、干燥、牢固。1、The base surface should
be clean,flat, dry and firm.
2、**底施工温度5℃。
2、The minimum construction temperature for
5℃
3、切忌使用沾有有机溶剂或油污的器具。 3、It is forbidden to use
the container with organic solventor grease dirt
inside.
4、无空气喷涂/刷涂/滚涂
4、No air spraying paint/brush paint/roller paint.
技 术 指 标 Technical data
|
外观
Appearance
|
平面光洁
Flat and clean
|
|
耐水性
Hydrophobia
|
（72h）不起泡不脱落
No foam and no peeling
off（72h）
|
|
硬度
Hardness
|
≥2H
|
|
耐磨性
Wear resistance
|
≤0.04g
|
|
指触干
Finger touch dried
|
约6小时（20℃）
About 6hours（20℃）
|
|
完全固化
Compete dried
|
7d
|
|
漆膜厚度
Paint membrance thickness
|
500微米500micrometer
|
|
300微米300micrometer
|
