数控旋管机：本机床是专为汽车排气管三元催化器生产工艺而设计的旋管缩口**机床，它能生产旋压出**大直径为150mm的管件，管件长度范围为200-900mm，机床主体采用HT250灰口铸铁铸造，经时效处理后加工，外露各部件镀硬鉻处理。被旋管件可一次性成形，不需要焊接和浸水检验。同时，本机床能完成产品的精车、修边等功能，适用于铝（合金）管、铜管、不锈钢管等多种材料的旋压加工。本机床采用现代数字化程序控制，编程操作简单、易学、易用。可根据用户的需要进行配置，如自动上、下料装置等等。

加工范围

旋管直径：  ￠60mm-￠150mm
管件长度：200mm-900mm
管件长度：
壁厚：
钢管        1.0mm-2.0mm
铝管：      1.0mm-3.0mm
不锈钢管：  1.0mm-2mm
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              

技术参数

旋压**大进给速度：5m/min
机床**大快速速度：10m/min
轴向力：12KN
径向力：12KN
                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

数控旋管机机床配置

数控操作系统                型号
广州数控设备有限公司       980TDB
Z轴驱动：                  DA98A-15
Z轴电机型号：              130SJT-M060D
X轴驱动：                  DA98A-15
X轴电机型号：              110SJT-M0600D
主轴电机功率：             5.5KW4P
交流伺服变压器：           BS-200
辅助电器元器件配置         国产正泰品牌                           

电子手轮
机床全防护罩