使用:
1)施工温度在5℃~40℃之间;
2)用两块布法清洁基材;
3)将胶嘴按需要的大小做45°切断;
4)将胶打满接缝处；
5)约30分钟结皮，应在此前进行修整.
重要:
1)使用前请做材料相容性测试;
2)不用于表面温度(45°C)以上的材料;
3)不用于有渗出物的材料；
4)不用于长期潮湿或完全的密闭环境.
注意:
远离儿童!
避免接触眼睛和皮肤!
如有接触,请用水冲洗;仍然不适的请就医检查.
执行标准:GB/T 16776-2005
保质期:9个月(<24℃)
“MEISHI 995A”is a high performance structural silicone
sealant: 1)one-component，room temperature，easy to use；2)neutral
curing,no corrosion to the materials;3)excellent adhesion,high
strength,appropriate of flexibility and elongation 4)Is the
excellent performance of heat and cold, Keep elastic between in
low(-45℃) and high(+150℃) temperatures; 5)Suitable for among
glass,aluminum
material,stone,concrete,brick,ceramic,plastic,structural
adhesive and sealing.
DIRECTIONS:
1)Use of temperature between 5℃~40℃;
2)Substrates should be solvent cleaned using two clothes
method;
3)Cut the nozzle to desired opening at 45°angle ;
4)Fill the joint completely;
5)Formation of skin in 30minutes,carried out dressing
before use.
IMPORTANT:
1)Be material compatibility testing before use;
2)Do not use in structural applications or where surface
temperatures exceed 45℃ ;
3)Should not be used for all Exudation of liquid
materials;
4)Should not be use in wet or unventilated and close
places.
PRECAUTIONS:
Keep out of the reach of children!
Avoid contact with eyes and skin!
In case of contact,flush with lot water;If still
indisposed,consult a doctor.
STANDARDS: GB/T 16776-2005.
DURABILITY: 9 Months(<24℃).
