厚 度: 0.3mm 0.5mm 0.7mm
表面形态: 亮光型 丝光型 止滑型
使用年限: 0.3mm:2年 0.5mm:2年以上 0.7mm:3年以上
地坪特性:
无缝防压、耐磨防滑、耐酸抗碱、防霉防水、清洁容易、保养简单、外观亮丽、颜色多样、施工简单、价格低廉。
适用范围: ① 服装厂、印刷厂、玩具厂、纺织厂;
② 电子厂、丝印厂、纸品厂等无重压地方;
③ 仓库、停车场。
施工工艺: ① 防水处理:一楼地面需已做好防水处理;
② 素地处理:依素地状况做好打磨、修补、除尘;
③ 环氧底漆:采用渗透性及附着力特强环氧底漆滚涂一道,增强表面附着力;
④ 环氧批土:依实际需要施工数道,要求达到平整无孔洞,无批刀印及砂磨印为
准;
⑤ 环氧面漆:溶济型环氧面漆或止滑面漆滚涂二道,完工后整体表面光亮洁净,颜
色均一,无空鼓;
⑥ 施工完成:24小时后方可上人,72小时后方可重压。(25℃为准,低温开放时间
需适度延长)
The thick degree: 0.3mm 0.5mm 0.7mm
Surface morphology: light type mordenite type anti-slip type
Usage: 0.3mm: 0.5mm for 2 years : 2 years of 0.7mm : 3 years
Floor characteristics: seamless pressure protection, anti-skid,
acid alkali resistance, waterproof, easy cleaning, and maintenance
is simple, the appearance of beautiful, color variety, has the
advantages of simple construction, low price.
Scope: garment factory, printing factory, toy factory, textile
factory;
The electronics factory, printing factory, paper products factory,
where no weight;
The warehouse, parking lot.
Construction technology of waterproof treatment:: floor need to
have good waterproof processing;
The hormone treatment: according to the ground state to grinding,
repair, removal;
The epoxy primer : the permeability and particularly strong
adhesion of epoxy primer coating a, enhanced surface
adhesion;
The epoxy group of soil: according to actual needs number of
construction, required to achieve smooth with no hole, no print and
sanding batch sword seal
Quasi;
The epoxy paint: solvent type epoxy paint or stop slippery surface
roller two, after completion of the whole surface bright and
clean, Yan
Color uniformity, no hollowing;
The construction completion: 24 hour before the person, 72 hours
before. ( 25 degrees, low temperature and open time
Modest extension )
|