| 规格 | 3.2/4.0 |
|---|
|
Category 类 别 |
Trade- Mark 牌 号 |
Equivalent to China Standard 相当国标 |
Characteristics & application 特性和用途 |
Equivalent to AWS 相当AWS |
| Hard-surfacing 硬 面 堆 焊 |
D 667 | EDZCr-B-15 | HRc≥48.
Resistance to wear, gas corrosion and oxidation. Hardfacing of
blast furnace hopper and cracker part. HRc≥48，耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件 |
|
| D 802 | EDCoCr-A-03 | HRc38-47.
Resistance to heat, wear and corrosion. Hardfacing of high
temperature part such as the edge of thermo-cutter. HRc38-47，耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃 |
ECoCr-A | |
| D 812 | EDCoCr-B-03 | HR5-50.
Resistance to heat, wear and corrosion. Hardfacing of high
temperature part such as internal-combustion engine valve. HR5-50，耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀 |
ECoCr-B | |
| D 822 | HRc≥53.
Resistance to Wear and heat, bad shock resistance. Hardfacing of
rotating blade wheel of boiler. HRc≥53，耐热、耐磨，但抗冲击性差。堆焊锅炉旋转叶轮 |
|||
| D 832 | EDCoCr-C-03 | HRc≥50.
Wear and heat resistance. Hardfacing of high temperature part such
as hot-rolling guided way. HRc≥50，耐热、耐磨。堆焊高温工件如热轧导轨 |
ECoCr-C | |
| D 842 | EDCoCr-D-03 | HRc28-38.
Corrosion and thermo-fatigue resistance, work harding. Hardfacing
of hot forging die. HRc28-38，耐蚀、抗热疲劳，具有加工硬化性。堆焊热锻模 |
||
| Cast iron 铸 铁 |
Z 308 | EZNi | Pure
nickel, excellent general properties. Used to weld thin cast iron
part and repair welding machined surface, such as guided way of
machine tool. 纯镍，综合性能好。铸铁薄件及加工面补焊用，如机床导卫 |
ENi-Cl |
| Z 408 | EZNiFe | Iron
nickel, high strength and excellent ductility. Repair welding of
important gray cast iron and nodular cast iron, such as cylinder
cap. 镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖 |
ENiFe-Cl | |
| Z 508 | EZNiCu-1 | Copper
nickel, good machinability and bad crack resistance. Repair welding
of sand hole and gray cast iron machined surface subject to no
load. 镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊 |
ENiCu-B | |
| Copper alloys 铜 合 金 |
Cu 107 | ECu | Red copper,
atmosphere and sea water corrosion and excellent electric
conductivity. Welding of red copper such as electrical copper
row. 紫铜，耐大气，海水腐蚀，导电性好。紫铜焊接用，如导电铜排 |
ECu |
| Cu 207 | ECuSi | Silicon
bronze, corrosion resistance and high strength. Welding of copper,
silicon bronze and brass. 硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用 |
ECuSi | |
| Cu 227 | ECuSnB | Tin
phosphor bronze, corrosion resistance and high strength. Welding of
copper, silicon bronze and brass. 锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用 |
ECuSn-C | |
| Cu 237 | ECuAl | Aluminum
bronze, wear and corrosion and high strength. Welding or surfacing
of copper alloys. 铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用 |
ECuAl-A2 | |
| Aluminum alloys 铝 合 金 |
Al 109 | TAl | Pure
aluminum, excellent corrosion resistance and middle strength.
Welding of pure aluminum. 纯铝，耐蚀性好，但强度不高，纯铝焊接用 |
E1100 |
| Al 209 | TAlSi | Silicon
aluminum, good crack resistance and wide range of usage. Welding of
aluminum alloys other than aluminum magnesium alloys. 铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金 |
E4043 | |
| Al 309 | TAMn | Manganese
aluminum, corrosion resistance and high strength. Welding of
aluminum alloys. 铝锰，强度高，耐蚀。铝合金焊接用 |
E3003 | |
| Nickel alloys 镍合金 |
Ni 102 | ENi-1 | Pure
nickel. Welding and surfacing of nickel and nickel to steel. 纯镍，用于镍、镍与钢的焊接与堆焊 |
ENi-1 |
| Ni 207 | ENiCu-7 | Copper
nickel. Welding and surfacing of copper nickel and copper nickel to
steel. 镍铜，用于镍铜、镍铜与钢的焊接与堆焊 |
ENiCu-7 |
斯米克银焊条
|
Category 类 别 |
Trade-mark 牌号 |
Specification 规 格 |
Melting Point 熔点(℃) |
Chemical composition 主要成份(%) |
Application 用 途 |
Equivalent to AWS 相当AWS |
| Copper zinc 铜锌 |
L103 | Wire & rod 丝 |
885-888 | Cu54 Zn Rem. | Brazing of copper, bronze and steel, subjected
to low load. 钎焊铜、青铜和钢等受力不大工件 |
|
| L104 | Foil 箔 |
890-930 | Cu57 Mn2 Co2 Zn Rem. |
Brazing of carbide cutting tool. 钎焊硬质合金 |
||
| Copper phosphorus 铜磷 |
L201 | Cast rod, wire & rod, powder 铸条、丝、粉 |
710-800 | P7 Cu Rem. | Brazing of copper and copper alloys. 钎焊铜及铜合金 |
BCuP-2 |
| L204 | Cast rod, wire 铸条、丝 |
640-815 | P5 Ag15 Cu Rem. |
Brazing of copper, copper alloys, silver and
molybdenum etc. 钎焊铜及铜合金、银、钼等金属。 |
BCuP-5 | |
| L205 | Cast rod, wire & rod, powder 铸条、丝、箔 |
640-800 | P6 Ag5 Cu Rem. |
Brazing of copper and copper alloys. 钎焊铜及铜合金 |
BCuP-3 | |
| L207 | Cast rod, wire & rod 铸条、丝 |
640-770 | P7 Ag5 Cu Rem. |
Brazing of copper and copper alloys. 钎焊铜及铜合金 |
BCuP-7 | |
| L209 | Cast rod, wire 铸条、丝 |
684-710 | P7 Ag2 Cu Rem. |
Brazing of copper and copper alloys. 钎焊铜及铜合金。 |
BCuP-6 | |
| Silver base 银基 |
L302 | Wire & rod 丝 |
745-775 | Ag25 Cu40 Zn Rem. |
Brazing of copper, copper alloys, steel and
stainless steel etc. 钎焊铜及铜合金、钢及不锈钢等 |
|
| L303 | Wire & rod 丝 |
660-725 | Ag45 Cu30 Zn余 |
Brazing of copper, copper alloys, steel and
stainless steel etc. 钎焊铜及铜合金、钢及不锈钢等 |
BAg-5 | |
| L303F | Flux coated rod 涂药丝 |
660-725 | Ag45 Cu30 Zn Rem. |
L303 coated with flux, the same application as
L303. 外涂钎剂的L303，用途与L303相同 |
BAg-5 | |
| L304 | Foil 箔 |
690-775 | Ag50 Cu34 Zn Rem. |
Brazing of copper, copper alloys and steel
etc. 钎焊铜及铜合金、钢等 |
BAg-6 | |
| L308 | Wire & rod 丝 |
779-780 | Ag72 Cu Rem. | Brazing of copper and nickel under vacuum or
reducing protective atmosphere. 铜和镍的真空或还原保护气氛钎焊 |
BAg-8 | |
| L312 | Wire & rod 丝 |
595-605 | Ag40.Cu.Zn.Cd | Brazing of copper, copper alloys, steel and
stainless steel etc. 钎焊铜及铜合金、钢及不锈钢等 |
||
| L313 | Wire & rod 丝 |
625-635 | Ag50.Cu.Zn.Cd | Brazing of copper, copper alloys, steel and
stainless steel etc. 钎焊铜及铜合金、钢及不锈钢等 |
BAg-1a | |
| L321 | Wire & rod 丝 |
615-650 | Ag56.Cu.Zn.Sn | Brazing of copper, copper alloys, steel and
stainless steel etc. 钎焊铜及铜合金、钢及不锈钢等 |
BAg-7 | |
| L323 | Wire & rod 丝 |
665-755 | Ag30.Cu.Zn.Sn | Brazing of copper, copper alloys, steel and
stainless steel etc. 钎焊铜及铜合金、钢及不锈钢等 |
||
| L325 | Wire &
rod 丝 |
645-685 | Ag45.Cu.Zn.Sn | Brazing of
copper, copper alloys, steel and stainless steel etc. 钎焊铜及铜合金、钢及不锈钢等 |
BAg-36 | |
| L326 | Wire &
rod 丝 |
650-720 | Ag38.Cu.Zn.Sn | Brazing of
copper, copper alloys, steel and stainless steel etc. 钎焊铜及铜合金、钢及不锈钢等 |
BAg-34 | |
| Aluminum base 铝基 |
L400 | Cast rod,
wire & rod 铸条、丝 |
577-582 |
Si11.5 Al Rem. |
Brazing of
aluminum and aluminum alloys. 铝及铝合金的钎焊 |
BAlSi-4 |
| L401 | Cast
rod 铸条 |
525-535 | Si5
Cu28 Al Rem. |
Brazing of
aluminum and aluminum alloys. 铝及铝合金的钎焊 |
||
| Tin lead 锡铅 |
L600 | Wire &
rod 丝 |
183-185 | Sn60
Sb≤0.8 Pb Rem. |
Soldering
of fusible metals and heat-treated part. 易熔金属及热处理件的钎焊 |
60Sn |
| L601 | Wire &
rod 丝 |
183-227 | Sn18
Sb2 Pb Rem. |
Soldering
of copper, copper alloys and galvanized iron plain sheet. 铜及铜合金、镀锌铁皮的钎焊。 |
18Sn | |
| L602 | Wire &
rod 丝 |
183-256 | Sn30
Sb2 Pb Rem. |
Soldering
of copper, brass, copper alloys and galvanized iron plain
sheet. 铜、黄铜、铁、镀锌铁皮的钎焊 |
30Sn | |
| L603 | Wire &
rod 丝 |
183-235 | Sn40
Sb2 Pb Rem. |
Soldering
of copper, copper alloys, steel and zinc parts. 铜及铜合金、钢、锌制零件的钎焊 |
40Sn | |
| L604 | Wire &
rod 丝 |
183-222 | Sn90
Sb≤0.15 Pb Rem. |
Soldering
of copper and steel for food and medicine field. 食品、医疗所需铜、钢等金属的钎焊 |
90Sn | |
| L605 | Wire &
rod 丝 |
232-240 | Ag5 Sn95 | Soldering
of copper and steel for electrical and food field. 电器、食品所需铜、钢等金属的钎焊 |
||
| L608 | Wire &
rod 丝 |
295-305 | Sn5.5
Ag2.5 Pb Rem. |
Soldering
of copper, copper alloys, steel and stainless steel. 铜及铜合金、钢及不锈钢的钎焊 |
||
| Nickel
base 镍基 |
L702 |
Powder 粉 |
970-1000 | Cr7 B3
Si4 Ni Rem. |
Brazing of
stainless steel under vacuum or protective atmosphere. 不锈钢真空或保护气氛钎焊 |
BNi-2 |
Tel：
￥面议
￥面议
￥面议
Tel：
￥面议
￥面议
￥面议
Tel：
￥面议
￥面议
￥面议
Tel：
￥1249.00元
￥839.00元
￥789.00元
