台塑 防静电地板技术参数 Technical description of LIQUN PVC floor 系统电组 System resistance：防静电型 Conductive 1.0×106-9 Ω 静电全衰期 Static full decay period：＜2S 起电电压starting voltage：IVI ＜100V 磨耗量 Amount of wear：≤0.02g/㎡燃烧性能Combustion property：FV-O 残余凹陷度 Residual hollow strength：≤0.15㎜加热尺寸变化率 Rate of size change at heating：≤0.20% 产品组成 product components：防静电PVC地板 Anti-static PVC floor/ PVC焊条PVC welding strips/铜箔Copper strips 20㎜×0.03㎜/导电胶Conductive glue 施工程序 Installation 1. 选择铺设方向,确定铺设基准线. Select the laying direction and fix the guide line on base. 2. 铺设20mm×0.03铜箔,以方格1.2mm×2.0m为间距.Laying the copper strips by 20mm×0.03m section, 1.2m×2.0m spacing 3. 涂刮胶水. Apply the glue. 4. 进行铺设及滚压.Laying the floors and pressing with a 60～80kg flooring roller. 5. 开槽、焊接.Grooving and hot welding with plastic strips. 维护与保养 Maintenance 1. 保持地板的清洁,人在地板上行走时须穿干净软底鞋.Keep cleanness, wear soft and cleanness shoes when walking on the floor. 2. 每月进行一次清洁,用拖布或其它工具将中性洗涤剂涂抹在地面上进行清洁,若有划痕,应修复.Clean with a damp mop and neutral detergent for every month. Reparation in time if the tile undermind. 3.每半年或一年,用清洗机对地面进行全面清洗,待干后地面上涂防静电蜡水,再用抛光机进行抛光.Clean with washing machines, and lay out anti-static fluid wax for every year or half of a year. 4.有机溶剂请勿直接接触PVC地面.Organic liquor could not be closed to PVC directly. 5.因橡胶容易磨损,橡胶垫、橡胶轮子的设备**好不要使用.Don’t use the devices with black rubber cushion or avoid black sulfide pollution. 6.有棱角、坚硬底盘的仪器设备不得直接在地板面上拖移,以免刮伤地板.The sharp and rough heavy matters don’t be scribed and dragged on the surface of floor.