结构型式 | 标准 | 显示方式 | 液晶显示 |
---|---|---|---|
开孔尺寸 | 5.6 mm |
北京北广精仪仪器设备有限公司 橡胶塑料滑动摩擦磨损试验仪 -微机控制
产品型号: M-200 用途:绝缘材料摩擦系数。
塑料滑动摩擦磨损试验仪 微机控制
特点:
适用于塑料制品及橡胶制品或其他复合材料的滑动摩擦,摩损性能测试。也可对试验中试样的摩擦力、摩擦系数和摩损量进行测定。
M-200塑料滑动摩擦磨损试验仪-液晶的详细资料:
塑料滑动摩擦磨损试验仪 微机控制
制造标准:
GB3960
塑料滑动摩擦磨损试验方法
产品名称:塑料滑动摩擦磨损试验仪
产品型号:M-200
显示方式:液晶显示
一、塑料滑动摩擦磨损试验仪 微机控制
主要适用范围及功能
本仪器是按照GB3960设计并制造。适用于塑料制品及橡胶制品或其他复合材料的滑动摩擦,摩损性能测试。也可对试验中试样的摩擦力、摩擦系数和摩损量进行测定。本机采用16位单片机电子处理系统,使得本仪器各项测试指标精度非常高。由于集成程度很高,所以设备本身的稳定性极好,本机具有一次设置,全自动运行,实验结束后自动停机,并检测摩损程度。是各个科研单位,大学,企业实验室的必备检测设备。
二、塑料滑动摩擦磨损试验仪 微机控制
功能特点:
1、试样尺寸: 30mm*7mm*6mm±0.1 mm
2、转动速度: 0-200转/分 连续可调
3、负 荷: 196N ± 0.2%(可扩充到392N)
4、摩擦环尺寸:¢40×10mm 倒角0.5×45°外圆表面与内圆同心度偏差小于0.01
5、摩擦力矩: 0--4N·m ±0.5%
6、计 数 器: 0-9999小时
7、砝码重量:4KG砝码一件,1KG砝码4件,可实现重量叠加功能。
三、塑料滑动摩擦磨损试验仪 微机控制
精度:
1、速度精度:1%
2、负荷精度:0.5%
3、摩擦力矩精度:1%
4、计数器精度:1S
5、传感器测量精度:1% FS
四、塑料滑动摩擦磨损试验仪 微机控制
主要配置:
1、主机一台
2、高精度扭矩传感器一只
3、彩晶显示控制系统箱一台
4、4Kg砝码两件(备用一套)
5、标准磨擦环四件(备用两件)
6、台式微型打印机一台
7、产品使用说明书一份
8、产品合格证
9、产品装箱单一份
10、整机重量:约45公斤Dielectric breakdown
voltage tester, dielectric strength tester, voltage tester,
insulation breakdown voltage tester, high voltage breakdown
strength tester of dielectric breakdown strength tester, dielectric
strength tester
Product Name: voltage breakdown testing instrument
Product type: BDJC-50KV
Control: microcomputer control
Meet the standards: GB1408-2006 electrical strength of insulating
materials - Test methods
GB/T1695-2005 vulcanized rubber power frequency voltage breakdown
strength and dielectric strength test
GB/T3333 cable paper at power frequency voltage breakdown test
method
HG/T 3330 insulating varnish films - Determination of electrical
breakdown strength
GB12656 capacitor voltage breakdown test method
ASTM D149 of solid electrical insulating materials at commercial
power frequencies of dielectric breakdown voltage and dielectric
strength test methods.
One, the voltage breakdown testing instrument, the applicable scope
and the function
Voltage breakdown testing instrument, mainly applicable to solid
insulation materials ( such as: plastic, rubber, thin film, resin,
mica, ceramic, glass, insulating paint and other media) in the
frequency of the voltage or DC voltage breakdown strength and
voltage withstand test.
Voltage breakdown testing instrument, controlled by a computer,
through my company independent research and development of new
intelligent digital integrated circuit and software control system
two parts to complete, so that the pressure rate truly uniform,
accurate, and can accurately measure the leakage current
data.
Real time dynamic drawing test curve, display test data, the
judgment is accurate, and can be preserved, analysis, modification,
print the test data.
In 1, the instrument in the test process can boost the breakdown
process in real time curve drawing, each test boost curve by
different color, after testing can be superimposed contrast
material testing data repeatability.
2, may at any time to obtain the current and historical test data
to view, edit and modify the experimental results.
In 3, during the test can be modified at any time test conditions
and storage path and automatic storage test results.
In 4, during the test, may at any time through the software
determines the test is effective, convenient screening test
results.
In 5, the software set a password, password generation protection,
do special person operation, to avoid irrelevant personnel
misoperation.
In 6, the test results edited print, convenient and more
user-friendly operation.
In 7, of a group of test curve data of the test results are
artificially selected.
In 8, the instrument adopts the advanced contactless original
uniform pressure, elimination of similar products in the mechanical
drive boosting mode.
Two, voltage breakdown testing instrument, technical
requirements:
In 01, the input voltage: AC 220 V
In 02, the output voltage: AC 0--50 KV;
DC 0 - 50 KV
03, electrical capacity: 3KVA
In 04, high grade: 0-10KV, 0--50KV,
In 05, 100V/S 200V/S 500 V/S pressure rate: 1000 V/S 2000V/S
5000V/S
( Note: meet the standard requirements and can be based on user
needs to set different pressurization rate )
06, test method:
DC test: 1, 2, 3 speed boost pressure gradient, pressure test
AC test: 1, 2, 3 speed boost pressure gradient, pressure test
07, voltage breakdown testing instrument, test media: air, test
oil
In 08, the installation of high sensitivity over current protection
device to ensure that the sample breakdown in 0.05S to cut off the
power supply.
09, adopts an intelligent integrated circuit speed boost.
10, support a short time short-circuit test requirements.
11, voltage test accuracy:≤ 1%.
In 12, the test voltage is continuous and adjustable:
0--50KV.
13, the current can be collected to level mA.
14, issued by the country one class unit of measurement calibration
verification certificate issued or customers designated units of
measurement certificate.
15, power: 220V ± 10% single-phase AC voltage and 50Hz±1%
frequencies.
16, current and voltage stability: the external power supply
voltage fluctuation 10%
Three, security protection
Voltage breakdown testing instrument, circuit protection
control:
( 1) the overpressure protection ( 2) over-current protection ( 3)
short circuit protection ( 4) ( 5) software leakage protection
misoperation
High voltage input circuit protection control:
( 1) the total power switch ( 2) regulator reset switch ( 3 ) high
voltage disconnecting switch
( 4) test box door safety switch ( 5) high voltage circuit switch (
6) leakage protection switch
In four, the main configuration
Standard configuration
Name configuration notes
01 experimental hosts
Control device 02 set
03 the test electrode two ( GB 1408.1 )
04 test tank two
The 05 discharge system one set
06 control system
07 data collection system
The 08 test a set of Software CD
09 computer of a brand
The 10 one ink-jet printer brand
11 using a manual
A 12 measurement certificate
13 certificate of product a
In four, a voltage breakdown testing instrument, equipment safety
instructions:
1, equipment to install a separate protective ground. Grounding
protection ground, mostly reduce the sample breakdown when the
surrounding the strong electromagnetic interference. Also avoid
control computer control.
In 2, the test equipment is provided with a number of circuit
protection measures, are: over-current protection, under-voltage
protection, leakage protection, short-circuit protection, DC test
discharge alarm.
3, grounding requirements: instruments require a separate
grounding, grounding of a national standard requirements, metal
rods buried at least 1.5 meters below.
In 4, the test equipment is provided with a number of circuit
protection measures, are: over-current protection, under-voltage
protection, leakage protection, short-circuit protection, DC test
discharge alarm.
Five, voltage breakdown testing instrument of conventional models
for:
BDJC-10KV
BDJC-20KV
BDJC-30KV
BDJC-50KV
BDJC-100KV
Canton company other insulating materials testing
instruments:
BDJC-0-100KV dielectric breakdown testing instrument
BDJC series insulating materials at power frequencies of dielectric
breakdown test instrument
BDJC series voltage dielectric strength test apparatus
BDJC series voltage breakdown testing instrument
BDJC series insulating paint film breakdown strength tester
BDJC capacitor voltage breakdown testing instrument
EST-121 volume surface resistivity measuring instrument
GDAT-A dielectric loss tester / dielectric constant test
GDAT-C model dielectric constant dielectric loss tester
BDH leakage resistance tester
BDH-B arc resistance tester
China Inspection and certification services tip and intellectual
leader, helped many testing quality inspection units and schools
and research units to provide comprehensive one-stop quality
solutions.
Pay attention to every detail is Canton company for each customer
commitment, and North Canton company has been pursuing the aim of.
Beijing North Canton precision instrument equipment limited
company
Tel:
Tel:
Tel:
Tel: