BDAT-B型高压电容电桥
主要用于测量高压工业绝缘材料的介质损失角的正切值及电容量。其采用了西林电桥的经典线路。
主要可以测量电容器,互感器,变压器,各种电工油及各种固体绝缘材料在工频高压下的介质损耗( tg)和电容量(
Cx)以,其测量线路采用“正接法”即测量对地绝缘的试品。
由于电桥内附有一个2500KV的高压电源及一台高压标准电容器,并将副桥和检流计与高压电桥有机的结合在一起,所以本电桥特别适应测量各类绝缘油和绝缘材料的介损(tg)及介电常数(ε)。
桥体本身带有5Kv/100pF标准电容,测量材料介损更为方便。
桥体内附电位**及指另仪,外围接线及少。
桥体采用了多样化的介损测量线路。
技术指标
测量范围及误差
在Cn=100pF
R4=3183.2(?)(即10K/π)时
测量项目
测量范围
测量误差
电容量Cx
40pF--20000pF ±0.5%
Cx±2pF
介质损耗tg?
0~1
±1.5%tg?x±0.0001
在Cn=100pF R4=318.3(?)(即1K/π)时
测量项目
测量范围
测量误差
电容量Cx
4pF--2000pF ±0.5%
Cx±3pF
介质损耗tg?
0~0.1
±1.5%tg?x±0.0001
Cx=R4×Cn/R3
tg?=ω?R4?C4
电容量及介损显示精度:
电容量: ±0.5%×tgδx±0.0001。
介 损: ±0.5%tg?x±1×10-4
高压电源技术特性
电压输出:0~5000V/50Hz
高压电流输出:0~10mA
内置标准电容器
电容量为100pF
tg小于5X10-5
北广公司其它绝缘材料检测仪器:
BDJC-0-100KV 介电击穿试验仪
BDJC系列绝缘材料工频率介电击穿试验仪
BDJC系列电压介电强度试验仪器
BDJC系列 电压击穿试验仪
BDJC系列绝缘漆漆膜击穿强度试验仪
BDJC电容器纸工频电压击穿试验仪
EST-121 体积表面电阻率测定仪
GDAT-A介质损耗测试仪/介电常数测试仪
GDAT-C新型介电常数介质损耗测试仪
BDH 耐漏电起痕试验仪
BDH-B耐电弧试验仪
注重每一个细节是北广公司对于每个客户的承诺 , 也是北广公司一直追求的宗旨。
中国检测行业与验证服务的尖端者和智领者,帮助众多检测质检单位和学校教研单位提供一站式的全面质量解决方案。
北京北广精仪仪器设备有限公司 www.beiguangjy.com
Dielectric constant dielectric loss
tester
Dielectric constant dielectric loss tester: GDAT-A
Dielectric constant dielectric loss tester to meet standards: GBT
1409-2006 measurement of electrical insulating materials at power,
audio frequency, high frequency ( including meter wavelengths ) of
the permittivity and dielectric loss factor of the recommended
method
GDAT-A
Dielectric constant dielectric loss tester details:
One, the dielectric constant dielectric loss tester overview
Dielectric loss and dielectric constant are all kinds of porcelain,
porcelain, ceramic capacitor device, and composite materials is an
important physical properties, by measuring the dielectric loss
tangent of dielectric constant ( Tan δ andε), to further understand
the effects of dielectric loss and dielectric constant of the
various factors, in order to improve the material the property
basis; instrument basic principle is the use of high frequency
resonance method, and provides, universal, multi-purpose, multiple
range impedance test. It uses single-chip computer as the control
core of measuring instrument, using the frequency locking,
frequency standard test point automatic setting, resonant point
automatic search, Q value range automatic conversion, numerical
display and other new technology, improved the tuning circuit, the
tuning circuit for testing the residual inductance is reduced to
the minimum, and retains the original Q table in the automatic
amplitude stabilizer technology, makes the new instrument in the
use of more convenient, measurement is more accurate. Instrument in
high frequency test conditions, measurement of high frequency
inductive or resonant loop of the Q value, the inductance of the
inductor is the amount and distribution of capacitance, capacitance
and loss angle tangent value of electrical materials, dielectric
loss in high frequency, high frequency circuit in parallel and
series resistance, the characteristic impedance of the transmission
line and so on.
Dielectric constant dielectric loss tester used in scientific
research institutions, schools, factories and other units to
inorganic metalloid new material property application
research.
In two, the dielectric constant dielectric loss tester technical
index
1.Q measurement
A.Q measurement range: 2~ 1023.
The b.Q value range profile: 30, 100, 300, 1000, automatic or
manual shift.
Nominal error C.
Item
GDAT-A
Frequency range
20kHz - 10MHz;
Intrinsic error
= 5%±full scale value 2%;
Operating error
= 7%±full scale value 2%;
Frequency range
10MHz - 60MHz;
Intrinsic error
= 6%±full scale value 2%;
Operating error
= 8%±full scale value 2%.
The 2 inductance measurement range: 14.5nH~8.14H
A 3 dielectric constant dielectric loss tester capacitance
measurements: 1~ 460
Item
GDAT-A
Measuring range
1 - 460pF
The main capacitor adjustable range
Degree of accuracy
30 - 500pF
The following 150pF± 1.5pF;
150pF or + 1%
Note: larger than direct measurement range of the capacitance
measurement see using rules
A 4 dielectric constant dielectric loss tester signal source
frequency coverage
Item
GDAT-A
Frequency range
10kHz - 50MHz
Frequency segmentation
( virtual )
10 - 99.9999kHz
100 - 999.999kHz
1 - 9.99999MHz
10 - 60MHz
Frequency indication error
3 x 10-5 ±1 words
5.Q qualified instructions preset function
Preset range: 5~ 1000.
Table 6.Q the normal working conditions
A. environment temperature: 0 ℃~ +40 ℃;
Relative humidity: <80% b.;
Power supply: C. 220V± 22V, 50Hz ±2.5Hz.
7 other
A. power consumption: about 25W;
Net weight: B. about 7kg;
Size: C. ( L× B× h )× 132 mm:380× 280.
8 product configuration:
The A. test host a;
B. inductance 9;
C. jig set
Inductance:
Coil test frequency distributions of Q values of P inductance
capacitance
9 100KHz 989.4 25mH
8 400KHz 13811.4 4.87mH
7 400KHz 20216 0.99mH
6 1MHz 19613252 μ H
5 1988.7 49.8 μ H 2MHz
4 4.5MHz 231710 μ H
3 1936.9 2.49 μ H 12MHz
2 2296.4 0.508 μ H 12MHz
1 25MHz, 0.125μ H 50MHz 2332110.9
Canton company other insulating materials testing
instruments:
BDJC-0-100KV dielectric breakdown testing instrument
BDJC series insulating materials at power frequencies of dielectric
breakdown test instrument
BDJC series voltage dielectric strength test apparatus
BDJC series voltage breakdown testing instrument
BDJC series insulating paint film breakdown strength tester
BDJC capacitor voltage breakdown testing instrument
EST-121 volume surface resistivity measuring instrument
GDAT-A dielectric loss tester / dielectric constant test
GDAT-C model dielectric constant dielectric loss tester
BDH leakage resistance tester
BDH-B arc resistance tester
China Inspection and certification services tip and intellectual
leader, helped many testing quality inspection units and schools
and research units to provide comprehensive one-stop quality
solutions.
Pay attention to every detail is Canton company for each customer
commitment, and North Canton company has been pursuing the aim of.
Beijing North Canton precision instrument equipment limited
www.beiguangjy.com
Tel:
Tel:
Tel:
Tel: