万能试验机，电子万能试验机，拉力机，抗弯强度试验机，拉压弯试验机，                                                                                                    液晶显示-电子万能试

验机(单柱)  
一、       拉压试验机性能特点：
拉压试验机,满足GB1040， GB13022，GB17200，GB16491等要求。该机广泛应用于塑料，橡胶等原料和制品的生产和科研中，电子拉力试验机适合化工生产企

业，高等院校，科研院所用于材料的力学性能的测定.主要用于塑料薄膜，织物，皮革，单丝，金属箔带等材料的测试.该机广泛应用于金属、非金属及各种复合材料

的检验分析，是科研院校、大专院校、工矿企业、技术监督、商检仲裁等部门的理想测试设备。

拉压试验机，设计融汇、吸收了国外的先进试验设备的控制技术及外形设计，本机外形美观、操作方便、性能稳定可靠。该机采用全数字调速电机及全数字调速系统

作为驱动装置，经圆弧同步带及圆弧同步带轮减速系统减速后带动精密丝杠副加载.本机无污染、噪音低，效率高，精度高，机械惯性小，调整范围宽，结构紧凑，

使用操作方便，性能稳定等优点

二、抗弯强度试验机,(单柱)主要技术指标：

01、**大试验力:单柱结构：0-5KN（试验力大小可根据用户需求而定）

02、试验力显示范围:0～5KN

03、试验力分档：全程不分档-*/
04、试验力测量精度:优于示值的±1%

05、位移分辨率:0.01mm

06、位移测量准确度:优于示值的±1%

07、横梁移动速度控制范围:0.05mm/min～300mm/min 说

08、位移速度控制精度:优于±1%

09、拉伸行程:0～800mm(不含夹具)

10、外形尺寸（长×宽×高）: 435mm×275mm×1700mm（单柱）

11、供电电源:220V、50Hz

三、拉压试验机,(单柱)配置：

01、高强度主机一台（单臂式结构）
02、高精度光电编码器一支

03、全数字调速系统和全数字调速电机各一套

04、精密丝杠副一套

05、精密圆弧同步减速系统一套

06、高精度传感器一支

07、**拉伸辅具一套

08、万能试验机控制系统及大液晶显示器一套

四、拉压试验机,(单柱)功能介绍：

01、速度瞬间切换：试验过程中可按预先设定的三个速度瞬间切换，以节约试验时间

02、自动停机：试样破坏后，移动横梁自动停止移动

03、显示方式：试验过程动态实时显示试验力、位移量、试验速度、峰值、试验状态同时实时在同一液晶屏幕上显示

04、自动返回：试验完成后试验机移动横梁自动返回到试验初始位置

05、限位保护：具有程控和机械两级限位保护功能

06、过载保护：当负荷超过额定值的3～5%时设备自动停止工作

07、自动打印：配制微型打印机，可对测试的数据进行打印

Universal testing machine, electronic universal testing machine, tensile machine, bending strength testing machine, bending test machine, liquid crystal

display - electronic universal testing machine ( single column )
One, tension and compression testing machine performance and characteristics:
Tension and compression testing machine, to meet the GB1040, GB13022, GB17200, GB16491 etc.. This machine is widely used in plastic, rubber and

other raw materials and products production and scientific research, electronic Rally test machine for chemical production enterprises, universities,

scientific research institutes for the mechanical properties of materials - mainly used for plastic film, fabric, leather, silk, metal foil belt materials testing.

This machine is widely applied to metal, nonmetal and various composite materials analysis, is a scientific research institutions, universities, industrial and

mining enterprises, and technical supervision, arbitration and other departments of the ideal testing equipment.
Tension and compression testing machine, design, integrate and absorption of foreign advanced testing equipment control technology and design, the

machine has the advantages of beautiful appearance, convenient operation, stable and reliable performance. The machine adopts digital speed

regulating motor and the full digital control system as the drive equipment, by the arc belt and arc synchronous belt wheel deceleration system drive after

the precision screw loading. The machine has no pollution, low noise, high efficiency, high precision, mechanical inertia is small, wide adjustment range,

compact structure, convenient operation, the advantages of stable performance
In two, the flexural strength testing machine, the main technical indicators ( single column ):
In 01, the maximum test load: single column structure: 0-5KN ( test force can be based on user demand .)
In 02, the test force display range: 0～ 5KN
03, test grading: full not classified -*/
In 04, the test force measuring accuracy is better than± 1%: indication
In 05, the displacement resolution: 0.01mm
In 06, the displacement measurement accuracy is better than± 1%: indication
07, beam moving speed control range: 0.05mm/min to 300mm/min
In 08, the displacement speed control precision is ± 1%:
In 09, the drawing stroke: 0～ 800mm ( not including jig )
10, dimensions ( length * width * height ): 435mm ×275mm× 1700mm ( single column )
11, power: 220V, 50Hz
Three, tension and compression testing machine, ( single column ) configuration:
In 01, high strength of a host ( single-arm structure )
02, a high precision photoelectric encoder
03, full digital control system and digital speed regulating motor of each of a set of
04, precision screw set
05, precision circular synchronous deceleration system one set
06, a high precision sensor
In 07, a special stretching device
In 08, universal testing machine control system and liquid crystal display set
Four, tension and compression testing machine, ( single column ) function introduction:
01, speed switching: test process according to the preset three speed switching, in order to save test time
02, automatic shutdown: sample after the destruction, the movable cross beam automatic stop moving
03, show the way: a test process dynamic real-time display of test force, displacement, speed test, peak, simultaneously in the same test condition is

displayed on a liquid crystal screen
04, automatic return: after completion of the test machine of movable beam automatically returns to the original position test
05, limit protection: a programmable and mechanical level two limiting protection function
06, overload protection: when the load exceeds the rated value from 3 to 5% when the device stops working automatically
07, automatic printing : preparation of micro printer, the test data for printing