1一、外壳采用优质钢板焊接成型,内装各种防爆电器,可根据要求制作成面板上直接操作或开门后操作等形式。
常见方案举例:
1、多路动力(照明)配电箱
通过将多个防爆断路器或动力( 照明)配电箱及数个防爆接线箱组合,可在380V/220V
,电流630A的三相交流50Hz配电系统中实现动力、照明配电设备的电能转换分配及控制。
2、多路电磁起动配电箱
通过将多个防爆电磁起动器或电磁起动箱和防爆断路器、操作柱和防爆接线箱等组合 ,可在电压380V的三相交流
50Hz 的配电系统中实现动力配送及电动机的集中控制,支路**大可达160A可根据用户要求实现远距离控制,并可根据要求加装信号灯
、电压表、电流表等监控装置。
3、多路降压起动配电箱
将防爆降压起动箱置于防护柜中,实现对交流50Hz、电压为380V/220V ,电路中容量为
95KW及以下的三相鼠笼型电动机的不频繁降压起动,具有短路,缺相、过流堵转等保护功能,可用手动
、自动和远控等多种方式来控制。
4、计量、监测控制
通过内装各种防爆电表或各种二次仪表,从而实现对电路中的参数、压力、温度等各种物理的计量和监测。
5、混合型
根据用户要求, 将相应的防爆电器组合, 从而满足用户现场的需要。
二、符合GB3836-2000,IEC60079标准要求。
Features
Ⅰ.The enclosure is weled by high-quality steel plates.Inside
will be install explo-sion proofelectrical appliances
which can be relatively selected according
to offered drawingsspecified technical
data and dim ensions .It is available
to e installed in flush plate.Directly operating
or iperating after opening is possible.
Examples:
1.Multi-circuit power(illumination)distribution
box
Through being made up of
several explosion-proof breakers or power(illumination)
distribution boxes and a few explosion-proof junction
boxes,the distribution boxcantransform , distribute and control
power and energy of 380V,630V,50Hz eletronagnet-system.
2.Multi-circuit electromagnet-starting
distribution box
Through being made up of
several explosion - proof electromagnetic starteers
or electromagnetic starting boxes,explosion-proof
CB,operating post and explosion-proofjunction box,the
contribution can transmit power and centrally controlthe motorsof
380V ,50Hz eletrical system .The branch
current can reach ip to 160A to user" s requirement so
as to be controlled remotely.And the signal
lamp,voltmeter,ammeter,etc can be added as required.
3.Multi-circuit voltage-reduced starting
distribution box
Explosion-proof voltage-reduce
starter is put in the box to unfrequently start the motors of 50Hz
,380V ,95kW and below 3-ohase squirral-case . It has the
protectionsof short-circuit,phase -failure, overcurrent and
motorblockl .Being controlled mannually,automatically or
remotely is available.
4.Meter-controllin,inspect-proof meterorauxiliary
instrument,the parameter,pressure,
temperature of circuit can be measured and inspected.
5.Compexity typeCombine appropriate applicanes to
user"s requirement to meet the demands on site.Panel"s
dimension is freely determined as required.
Ⅱ.Suitable for GB3836-2000,IEC60079 Standard request.
|