优特力大规格板隔墙系统应用

1、沿顶龙骨Along top keel

2、沿地龙骨Along floor keel

3、横撑龙骨Horizonal keel

4、竖龙骨Vertical keel

5、自攻螺钉Tapping screw

6、膨胀螺丝Expansion bolt

7、优特力板Utility’s board

8、混凝土踢脚座Concrete skirting boards

安装方法：INSTALLATION METHODS

A.    轻钢龙骨骨架

Light steel keel frame

1、放样弹线

Draw the installation guideline.

2、用射钉或膨胀螺丝将天地龙骨分别固定在地板与顶部楼板

Use the shooting nail or expansion bolt to fix the along top keel and the along floor keel on the ceiling and floor.

3、将竖龙骨按设计要求排列好，并安装好横撑龙骨

And arrange the vertical keel as per the request and install the horizontal keel.

B.    板材封装固定

Fixing method of the boards

1、先将板材切至所需尺寸（比墙高短10mm左右）

To cut the boards as per the required size which is 10mm shorter than the wall height.

2、板材以错缝的方式用自攻螺丝固定在龙骨上， 自攻螺丝间距一般为200-250mm左右，需沉入板材0.5mm

The boards should be fixed on the keels by the tapping screews in seam misplacement form,the distance between tapping screews is 200-250mm.And esch screew head should enter 0.5mm depth into the boards.

3、注意板与板之间需留4mm左右伸缩缝

Please leave a seam between boards about 4mm width.

4、封板应从板中间向板四周固定，不可多点同时作业，避免产生内应力而使板材翘曲

When fixing the boards.it should be mounted from its center to sdges.Don’t fix it at different points at same time avoid the over bending of the boards.

5、在板材封装固定之前，视需要可在龙骨骨架空腔内布置入玻璃棉或岩棉等以加强隔音、防火效果

Before fixing we can place the mineral wool or glass fiber into the empty space between the boards to get the better soundproofing and fireproofing effects.