北京北广精仪仪器设备有限公司
产品名称:硫化橡胶工频电压击穿强度试验仪
产品型号:BDJC-100KV
控制方式:微机控制
满足标准:GB1408-2006 绝缘材料电气强度试验方法
GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验
GB/T3333
电缆纸工频电压击穿试验方法
HG/T
3330绝缘漆漆膜击穿强度测定法
GB12656
电容器纸工频电压击穿试验方法
ASTM D149
固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.
一、工频电压击穿强度试验仪,适用范围及功能
主要适用于固体绝缘材料(如:塑料、橡胶、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等介质)在工频电压或直流电压下击穿强度和耐电压的测试。
工频电压击穿强度试验仪,由电脑控制,通过我公司自主研发的全新智能数字集成电路系统与软件控制系统两部分来完成,使升压速率真正做到匀速、准确,并能够准确测出漏电电流的数据。
可实时动态绘制试验曲线,显示试验数据,判断准确,并可保存,分析,修改,打印试验数据。
1、本仪器在试验过程中可对升压击穿过程绘制实时曲线,每次试验的升压曲线都由不同颜色构成,试验结束后可叠加对比材料的试验数据重复性。
2、可以随时调取当前及历史试验数据进行查看,编辑及修改实验结果。
3、试验过程中可以随时修改试验条件及存储路径及自动存储试验结果。
4、试验过程中,可随时通过软件决定本次试验是否有效,方便筛选试验结果。
5、可对软件设置密码,生成密码保护,做到专机专人操作,避免无关人员误操作。
6、 可对试验结果编辑修改后打印,方便操作 更加人性化。
7、可对一组试验中曲线数据的试验结果是否进行人为选定 。
8、本仪器采用先进的无触点原件匀速调压方式,淘汰同类产品中机械传动升压方式。
二、 技术要求:
01、输入电压: 交流 220 V
02、输出电压: 交流 0--50 KV ;
直流 0—50 KV
03、电器容量: 5KVA
04、高压分级: 0-10KV,0--50KV,
05、击穿试验仪 升压速率: 100V/S 200V/S 500 V/S 1000 V/S 2000V/S 5000V/S
等
(备注:满足标准要求并可以根据用户需求设定不同的升压速率)
06、试验方式:
直流试验:1、匀速升压 2、梯度升压 3、耐压试验
交流试验:1、匀速升压 2、梯度升压 3、耐压试验
07、工频电压击穿强度试验仪,试验介质:空气,试验油
08、安装灵敏度较高的过电流保护装置保证试样击穿时在0.05S内切断电源。
09、采用智能集成电路进行匀速升压。
10、支持短时间内短路试验要求。
11、电压试验精度: ≤ 1%。
12、试验电压连续可调: 0--50 KV。
13、电流可采集到mA级。
14、出具国家一级计量单位校准检定证书或出具客户指定计量单位的证书。
15、电源:220V±10%的单相交流电压和50Hz±1%的频率。
16、电流电压稳定度: 外界电源电压波动10%时
三、工频电压击穿强度试验仪,安全保护
工频电压击穿强度试验仪,电路保护控制:
(1)超压保护 (2)过流保护 (3)短路保护(4)漏电保护 (5)软件误操作保护
高压输入回路断电保护控制:
(1)总电源开关
(2)调压器复位开关 (3)高压断电开关
(4)试验箱门安全开关
(5)高压回路开关 (6)漏电保护开关
四、工频电压击穿强度试验仪,主要配置
标准配置
序号 名称 配置 备注
01 试验主机 一台
02 控制装置 一套
03 试验电极 二套(国标1408.1)
04 试验油箱 二只
05 放电系统 一套
06 控制系统 一套
07 数据采集系统 一套
08 试验软件 一套 光盘
09 计算机 一套 品牌
10 喷墨打印机 一台 品牌
11 产品使用说明书 一份
12 计量证书 一份
13 产品合格证 一份
四、工频电压击穿强度试验仪,安全说明:
1、设备要安装单独的保护地线。接保护地线,主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。
2、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。
3、接地要求: 仪器需要单独接地,接地附合国家标准要求,金属棒深埋地下至少要1.5米以下。
4、该试验设备的电路设有多项保护措施,主要有:过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。
五、工频电压击穿强度试验仪常规型号为:
BDJC-10KV
BDJC-20KV
BDJC-30KV
BDJC-50KV
BDJC-100KV
北广公司其它绝缘材料检测仪器:
BDJC-0-100KV 介电击穿试验仪
BDJC系列绝缘材料工频率介电击穿试验仪
BDJC系列电压介电强度试验仪器
BDJC系列 电压击穿试验仪
BDJC系列绝缘漆漆膜击穿强度试验仪
BDJC电容器纸工频电压击穿试验仪
EST-121 体积表面电阻率测定仪
GDAT-A介质损耗测试仪/介电常数测试仪
GDAT-C新型介电常数介质损耗测试仪
BDH 耐漏电起痕试验仪
BDH-B耐电弧试验仪
中国检测行业与验证服务的尖端者和智领者,帮助众多检测质检单位和学校教研单位提供一站式的全面质量解决方案。
注重每一个细节是北广公司对于每个客户的承诺 ,
也是北广公司一直追求的宗旨。北京北广精仪仪器设备有限公司
Dielectric breakdown voltage tester,
dielectric strength tester, voltage tester, insulation breakdown
voltage tester, high voltage breakdown strength tester of
dielectric breakdown strength tester, dielectric strength
tester
Product Name: voltage breakdown testing instrument
Product type: BDJC-50KV
Control: microcomputer control
Meet the standards: GB1408-2006 electrical strength of insulating
materials - Test methods
GB/T1695-2005 vulcanized rubber power frequency voltage breakdown
strength and dielectric strength test
GB/T3333 cable paper at power frequency voltage breakdown test
method
HG/T 3330 insulating varnish films - Determination of electrical
breakdown strength
GB12656 capacitor voltage breakdown test method
ASTM D149 of solid electrical insulating materials at commercial
power frequencies of dielectric breakdown voltage and dielectric
strength test methods.
One, the voltage breakdown testing instrument, the applicable scope
and the function
Voltage breakdown testing instrument, mainly applicable to solid
insulation materials ( such as: plastic, rubber, thin film, resin,
mica, ceramic, glass, insulating paint and other media) in the
frequency of the voltage or DC voltage breakdown strength and
voltage withstand test.
Voltage breakdown testing instrument, controlled by a computer,
through my company independent research and development of new
intelligent digital integrated circuit and software control system
two parts to complete, so that the pressure rate truly uniform,
accurate, and can accurately measure the leakage current
data.
Real time dynamic drawing test curve, display test data, the
judgment is accurate, and can be preserved, analysis, modification,
print the test data.
In 1, the instrument in the test process can boost the breakdown
process in real time curve drawing, each test boost curve by
different color, after testing can be superimposed contrast
material testing data repeatability.
2, may at any time to obtain the current and historical test data
to view, edit and modify the experimental results.
In 3, during the test can be modified at any time test conditions
and storage path and automatic storage test results.
In 4, during the test, may at any time through the software
determines the test is effective, convenient screening test
results.
In 5, the software set a password, password generation protection,
do special person operation, to avoid irrelevant personnel
misoperation.
In 6, the test results edited print, convenient and more
user-friendly operation.
In 7, of a group of test curve data of the test results are
artificially selected.
In 8, the instrument adopts the advanced contactless original
uniform pressure, elimination of similar products in the mechanical
drive boosting mode.
Two, voltage breakdown testing instrument, technical
requirements:
In 01, the input voltage: AC 220 V
In 02, the output voltage: AC 0--50 KV;
DC 0 - 50 KV
03, electrical capacity: 3KVA
In 04, high grade: 0-10KV, 0--50KV,
In 05, 100V/S 200V/S 500 V/S pressure rate: 1000 V/S 2000V/S
5000V/S
( Note: meet the standard requirements and can be based on user
needs to set different pressurization rate )
06, test method:
DC test: 1, 2, 3 speed boost pressure gradient, pressure test
AC test: 1, 2, 3 speed boost pressure gradient, pressure test
07, voltage breakdown testing instrument, test media: air, test
oil
In 08, the installation of high sensitivity over current protection
device to ensure that the sample breakdown in 0.05S to cut off the
power supply.
09, adopts an intelligent integrated circuit speed boost.
10, support a short time short-circuit test requirements.
11, voltage test accuracy:≤ 1%.
In 12, the test voltage is continuous and adjustable:
0--50KV.
13, the current can be collected to level mA.
14, issued by the country one class unit of measurement calibration
verification certificate issued or customers designated units of
measurement certificate.
15, power: 220V ± 10% single-phase AC voltage and 50Hz±1%
frequencies.
16, current and voltage stability: the external power supply
voltage fluctuation 10%
Three, security protection
Voltage breakdown testing instrument, circuit protection
control:
( 1) the overpressure protection ( 2) over-current protection ( 3)
short circuit protection ( 4) ( 5) software leakage protection
misoperation
High voltage input circuit protection control:
( 1) the total power switch ( 2) regulator reset switch ( 3 ) high
voltage disconnecting switch
( 4) test box door safety switch ( 5) high voltage circuit switch (
6) leakage protection switch
In four, the main configuration
Standard configuration
Name configuration notes
01 experimental hosts
Control device 02 set
03 the test electrode two ( GB 1408.1 )
04 test tank two
The 05 discharge system one set
06 control system
07 data collection system
The 08 test a set of Software CD
09 computer of a brand
The 10 one ink-jet printer brand
11 using a manual
A 12 measurement certificate
13 certificate of product a
In four, a voltage breakdown testing instrument, equipment safety
instructions:
1, equipment to install a separate protective ground. Grounding
protection ground, mostly reduce the sample breakdown when the
surrounding the strong electromagnetic interference. Also avoid
control computer control.
In 2, the test equipment is provided with a number of circuit
protection measures, are: over-current protection, under-voltage
protection, leakage protection, short-circuit protection, DC test
discharge alarm.
3, grounding requirements: instruments require a separate
grounding, grounding of a national standard requirements, metal
rods buried at least 1.5 meters below.
In 4, the test equipment is provided with a number of circuit
protection measures, are: over-current protection, under-voltage
protection, leakage protection, short-circuit protection, DC test
discharge alarm.
Five, voltage breakdown testing instrument of conventional models
for:
BDJC-10KV
BDJC-20KV
BDJC-30KV
BDJC-50KV
BDJC-100KV
Canton company other insulating materials testing
instruments:
BDJC-0-100KV dielectric breakdown testing instrument
BDJC series insulating materials at power frequencies of dielectric
breakdown test instrument
BDJC series voltage dielectric strength test apparatus
BDJC series voltage breakdown testing instrument
BDJC series insulating paint film breakdown strength tester
BDJC capacitor voltage breakdown testing instrument
EST-121 volume surface resistivity measuring instrument
GDAT-A dielectric loss tester / dielectric constant test
GDAT-C model dielectric constant dielectric loss tester
BDH leakage resistance tester
BDH-B arc resistance tester
China Inspection and certification services tip and intellectual
leader, helped many testing quality inspection units and schools
and research units to provide comprehensive one-stop quality
solutions.
Pay attention to every detail is Canton company for each customer
commitment, and North Canton company has been pursuing the aim of.
Beijing North Canton precision instrument equipment limited
company