"美氏M6361"酸性硅酮密封胶是一种酸性固化的高性能密封胶:1）固化迅速;2）固化收缩率低;3）在低温（-45℃）至高温（＋164℃）内保持良好弹性;4）柔软抗震,耐变形;5）对于多数基材有良好的兼容性;6）用于各类门窗安装.
说明:
1）施工温度在5°C~40°C之间;
2）用两块布法清洁基材;
3）将胶嘴按需要的大小做45°切断;
4）将胶打满接缝处;
5）10分钟内结皮.
重要:
1）使用前请做材料相容性测试;
2）不用于铜,锌和砖石材料;
3）不用于幕墙结构性装配或表面温度（45℃）以上的材料;
4）不用于渗出油污或溶剂的材料；
5）在足够通风条件下使用.
注意:
远离儿童!
避免接触眼睛和皮肤!
如有接触,请用水冲洗;仍然不适的请就医检查.
执行标准: GB/T14683-2003.
保质期: 7个月（<24℃）

"MEISHI M6361" acidity silicone sealant is a acidic curing high performance grade silicone sealant:1）Rapid solidification;2）Low shrinkage on curing;3）Keep elastic in low（-45℃） and high（＋164℃） temperatures;4）High grade soft,be able to bear oscillation;5）Good adhesion to many substrates;6）Applicable to the assembly of various doors and windows.
DIRECTIONS:
1）Construction applicable between 5℃~40℃;
2）Substrates should be solvent cleaned using two clothes method;
3）Cut the nozzle to desired opening at 45°angle ;
4）Fill the joint completely;
5）Formation of skin in 8 minutes.
IMPORTANT:
1）Please do material compatibility testing before use;
2）Not for copper,zinc and stone;
3）Do not use in structural applications or where surface temperatures exceed 45℃ for material safety;
4）Incompatible oozing out oily or solvents;
5）Apply in Plenty of air.
PRECAUTIONS:
Keep out of the reach of children!
Avoid contact with eyes and skin!
In case of contact,flush with lot water;If still indisposed,consult a doctor.
STANDARS: GB/T 14683-2003.
STORAGE: 7 Months（<24℃）.