贵阳花溪中铁项目彩钢板筠尚长条扣板pvc外墙挂板装饰旧厂房改造

1、板型：pvc外墙双片式挂板

2、规格

     1)长宽：4000mm*240mm
      2)板厚：1.25mm±0.03mm   
       3)长度：标准板长为4m，可按客户要求定尺4m至12m等。

1, plate type: PVC wall double - chip hanging board

2, specification

1) length and width: 4000mm*240mm

2) plate thickness: 1.25mm 0.03mm

3) length: the length of the standard plate is 4m, which can be fixed as 4m to 12m according to customer requirem

1, nails

Stainless steel nails (steel nails, self-tapping screws, expansion screws) should be selected according to the hardness of the wall material, and high quality expansion bolts (plastic expansion tubes and stainless steel screws) should be used for hanging plate fixation, and the temperature should be -40c0 to 70C0.16. The nail cap with a diameter of about 8mm, nail rod diameter of about 3-4mm, nail length of about 25-40mm, the whole expansion bolt into the wall shall not be less than 25mm.

2. Performance table of individual components. Drawing force and design value of external wall panel fixer (safety factor of drawing force: 3.0)

Average drawing force of all kinds of wall design

Reinforced concrete (C25) 0.20kn 0.60kn

Sintered solid brick 0.20kn 0.60kn

Porous brick wall 0.15KN 0.45 KN

Concrete hollow block 0.15KN 0.45 KN

安装筠尚牌pvc外墙装饰挂板应根据墙面材质硬度选用不锈钢钉子（钢钉、自攻螺丝、膨胀螺钉），挂板固定采用优质膨胀螺栓（塑料膨胀管和不锈钢螺钉），适应温度为-40C0至70C0。钉帽约φ8mm，钉杆直径约φ3-4mm，钉长约25-40mm，整个膨胀螺栓深入墙内不得小于25mm。

 2、单个构件性能表表.外墙挂板固定件的拉拔力及设计值 （拉拔力安全系数取3.0）