产品编号：TDL-013（勾）

产品编号：TDL-013（勾）

Serial Number: TDL-013F

用 途：适用于外墙外保温体系瓷砖的勾缝，适用缝宽1-12mm。

Function: Joint filler for external thermal insulation system.

产品介绍：本产品由优质的水泥、细砂及聚合物添加剂组成，具有良好的与瓷砖边缘粘合性、低收缩性、足够的柔韧性、高耐磨损性、防水透汽性和优良的施工性等特点。本公司提供白色、黑色、红色、绿色、灰色、蓝色、咖啡色等7种基本颜色，客户特殊要求的可根据所提供的色卡订作。

Product Introduction: Made of high quality cement, fine sand and polymer additives; low in shrinkage, highly adhesive, pliable, wear resisting, waterproof and workable. Colors available: white, black, red, green, gray, blue and light brown. Temporary color can be made according to customers’ requirements.

技术性能：

Technical Specifications:

包装、贮存与运输： 三复合牛皮纸包装，25kg/袋，防潮、防雨，存于阴凉干燥处，保质期6个月；按非危险品运输。

Package, Storage and Transportation: 25kg/sack, kept in dry, cool place, 6 months’ quality guarantee period, deliver by the way of non-dangerous goods

使用方法：

Usage:

1、充分湿润瓷砖，且表面无浮水、冰霜、灰尘、疏松、起砂及缺边短角等现象；

1. Fully wet tiles, remove excessive water, ice and dust;

2、按粉料：水 = 100：25（重量比）搅拌成均匀胶状，静置5-10分钟，再次搅拌即可使用；

2. Mix-ratio: powder : water = 100 : 25, 5 to 10 minutes later, mix again and use.

3、施工时，宜用镘刀或腻子刀施工，小心涂抹，先使嵌缝料满粘两侧，再填满中间；然后压平，或用塑料或竹木溜子压成半幅面状。

3. During application, fill both sides with joint filler, and then fill middle part and press.

4、勾缝后应用瓷砖表面多余的嵌缝料擦拭干净。

4. Remove extra joint filler on the surface of tiles.

5、参考消耗量：4-5kg/m²。

5. Recommended quantity: 4-5kg/m²

注意事项：

Remark:

1、施工温度宜大于5℃ 以上，风力5级以下，避免雨天施工；在冬施情况下，应采用防冻型砂浆；

1. The favorable construction conditions: temperature >5℃, wind force<5, no construction no rainy days; frost-resistant mortar should be used in winter.

2、配制后的砂浆应在搅拌后2h内用完。禁止使用过时灰。

2. Use up mixed mortar within 2 hours. Expired products are forbidden.