材质 | 硅酮 | 产品类别 | 中性 |
---|---|---|---|
作用 | 粘接密封 | 适用范围 | 金属玻璃木材 |
性质 | 耐腐蚀 耐高温 耐高压 耐磨损 其他 | 厚度 | 3~5 mm |
样品或现货 | 样品 | 使用温度 | -40~140 ℃ |
“美氏793A”耐候硅酮密封胶是一种中性固化的密封胶:1)不腐蚀基材;2)固化收缩率低;3)在低温(-45°C)至高温(+150°C)内保持一致弹性;4)柔软抗震,耐变形;5)适合于玻璃,铝材,石材,混凝土,砖瓦,陶瓷,塑料间的非结构性粘结密封.
说明:
1)施工温度在5℃~40℃之间;
2)用两块布法清洁基材;
3)将胶嘴按需要的大小做45°切断;
4)将胶打满接缝处
5)约25分钟结皮.
重要:
1)使用前请做材料相容性测试;
2)不用于结构性装配或表面温度(45°C)以上的材料;
3)不用于渗出油污或溶剂的材料.
注意:
远离儿童!
避免接触眼睛和皮肤!
如有接触,请用水冲洗;仍然不适的请就医检查.
执行标准:GB/T14683-2003
保质期:7个月(<24℃)
“MEISHI793A” Weather proofing silicone sealant is a neutral
cure silicone sealant:1)Not corrosion to the materials;2)Low
shrinkage on curing;3)Keep elastic in low(-45℃) and high(+150℃)
temperatures; 4)High grade soft,be able to bear oscillation;
5)Suitable for glass,aluminum
material,stone,concrete,brick,ceramic,plastic,non-structural
sealing.
DIRECTIONS:
1)Construcation applycabie between 5℃~40℃;
2)Substrates should be solvent cleaned using two clothes
method;
3)Cut the nozzle to desired opening at 45°angle ;
4)Fill the joint completely;
5)Formation of skin in 25 minutes.
IMPORTANT:
1)Please do materal compatibility testing before use;
2)Do not use in structural applications or where surface
temperatures exceed 45℃ for materialsafety;
3)Incompatible oozing out oily or solvents.
PRECAUTIONS:
Keep out of the reach of children!
Avoid contact with eyes and skin!
In case of contact,flush with lot water;If still indisposed,consult
a doctor.
STANDARS: GB/T14683-2003.
DURABILITY: 7 Months(<24℃).
Tel:
Tel:
Tel:
Tel: