.Use
XCT型隔膜式跳汰机用于重力选矿,重力选矿是基于矿石的比重不同,在介质中沉降速度亦异,利用矿物重量上的差别,而完成矿粒混合物的分层选别工作。本产品由原地矿部**指定企业生产,执行行业标准。
隔膜式跳汰机适于选别黑色和有色金属、化学、建筑等方面的实验研究之用。
XCT Diaphragm Jig is applied to gravity concentration, which makes layered separations of ore grain mixture using difference in mineral weight based on variation of settling speed for the different specific gravity of ores in medium. The product is made by the only manufacturer designated by the former Ministry of Geology and Mineral Resources, in compliance with the Industrial standards.
XCT Diaphragm Jig is suitable to used for research in labs of ferrous and non-ferrous metals, chemical, building materials and other industries.
二、技术参数
Ⅱ. Technical Parameters
型号规格 Model |
单位 Uite |
XCT100×150 |
XCT200×300 |
跳汰室长度 Length |
mm |
150 |
300 |
跳汰室宽度 Width |
mm |
100 |
200 |
跳汰室数 Jig chamber |
(个) |
2 |
2 |
跳汰室面积 Area |
m2 |
0.03 |
0.06 |
偏心**大冲程 Stroke |
mm |
≤20 |
≤32 |
给矿粒度 Feed size |
mm |
≤3 |
≤6 |
每分钟冲次 Times of stroke |
1/min |
420 |
346 |
处理能力 Capacity |
kg/h |
20-70 |
≤700 |
筛下水的**大量 Water comsumption |
L/S |
0.117 |
0.117 |
筛上水的**大量 Water comsumption |
L/S |
0.10 |
0.10 |
电机功率 Power |
kw |
0.4 |
0.75 |
外形尺寸 Overall dimensions |
mm |
752×520×1312 |
1110×520×1312 |
重量 Weight |
kg |
150 |
175 |
三、结构原理
III. Structure and Working Principle
隔膜式跳汰机,如图一所示,它上部为长方形,而下部为角锥形的洗矿槽1与2,两个相连,装在机架3上构成一体,各槽各有跳汰区A、B和隔膜区C,在A、B两区之间用不到底的隔板分开。各槽共助于同一传动装置4,配水活瓣5,如图二所示,及补助水管6,跳汰区上部跳汰过程靠隔膜往复运动造成水的鼓动来进行矿物分选,隔膜下冲时,在筛板下面供给补助水,补助水用配水活瓣5来调节,活瓣5与隔膜7的动作是同步的,当隔膜下降时活瓣关闭,水不进入跳汰机中,但隔膜上升时,活瓣启开因此,减少了跳汰机内下降水流的作用。
Tel: